July 13, 2008Will 3/4T torsion bars work on a 1/2? i want a little stiffer ride, hopefully, alittle more height but more importantly the stiffer front. I want to add a hd bumper and a winch and will want the extra support. Anyone know what the pros/cons will be if it will work? also, are 1/2/ and 3/4T leaf springs the same size and can i swap them in on my suburban?
Forums : Suspension : 3/4T torsion bars/springs? (677 Views)
July 13, 2008It''s been done but I''m not real sure about it. Did you look on ChevyTruckWorld?
July 13, 2008gotta move the crossmember back i think. and it will just swap over.
July 14, 2008Yeh i had posted it over there but hadn''t gotten a response so i though id try here. Are the 3/4 longer than the 1/2?
July 14, 2008Is the torsion keyway the same ID ?
Some come to gaze and wonder, i came to interact with thunder! Live a little life is to short.
July 20, 2008they are longer i belive. will give you a taller ride height i belive as well.
July 20, 2008they are not longer,all chevy''s torsion bars are 54" long and 1 13/16 hex
i just went out and double checked on my 98 k3500 crew dually against my 88 7200 gvw(same as half ton) 3/4 ton ones in the garage
so in theory you could use a set from a 6.5 powered truck and get the stiff ness you want since the 6.5 is the heaviest engine put in these body style trucks, it weighs more than the 7.4