March 27, 2008
14bolt is $850 and dana 44 is $500 (last time i talked to him it was)Forums : Off Roading : Axle swap need help (10013 Views)
![]() |
![]() |
1 | | 2 | | 3 | | 4 | | 5 | | 6 | | 7 | | 8 | | 9 | | 10 | | 11 |
![]() |
![]() |
March 28, 2008
good point fabbed88.Some come to gaze and wonder, i came to interact with thunder!
Live a little life is to short.
March 31, 2008
Better yet, I'm gonna be running these.....http://www.polyperformance.com/shop/product.php?productid=388&cat=59&page=1
April 1, 2008
are you going to just cut the end off your current arm and them fabb up a mount?I would be concerned about the length of the arm. would suck to haveto move the brackets again.
Some come to gaze and wonder, i came to interact with thunder!
Live a little life is to short.
April 1, 2008
Gonna cut the bolt a little then run a threaded sleve so I can scew in the johnny joint, Then I will sleeve the threaded sleve and weld that to the rad arm and gusset it. I will still have adjustability in my joint.April 1, 2008
sweet. good call.that is going to be awsome.
Some come to gaze and wonder, i came to interact with thunder!
Live a little life is to short.
April 1, 2008
Fabbed here is a photo to reference. Camburg already makes that type of arm , but there are no rules that say you cant use there idea to perfect yours.
Some come to gaze and wonder, i came to interact with thunder!
Live a little life is to short.
April 1, 2008
That's pretty much how I'm gonna build my mounts.April 2, 2008
SLLLLLLLLLLLLOOOOOOOOOOOOOOOOWWWWWWWWWWWW.I was promised by the machine shop to have a short block motor by the end of this week. The axles are still dragging. I picked up the front end outers and i am going to rebuild them myself.
Some come to gaze and wonder, i came to interact with thunder!
Live a little life is to short.
April 2, 2008
Keep us up dated....are you posting any of this on FTW cuz I haven't seen anything.
![]() |
![]() |
1 | | 2 | | 3 | | 4 | | 5 | | 6 | | 7 | | 8 | | 9 | | 10 | | 11 |
![]() |
![]() |