August 1, 2004Have 33/12.50/15 Goodyear MT/R's mounted on 8.5/15 rims. Kept getting vibrations after each off road trip. Had tires balanced just before last trip and marked tire first even with valve stem. Aired down at trail to 19lbs. Climbed a few rock piles and a slab while in low. At top of trail discovered tire had slipped on rim. Painted another mark on rim to match tire. After desending mountain discovered tire slipped again. Both tires on left side of vehicle did the same thing. Vehicle is geared pretty low. How dow I correct this problem with out going to bead locks. Is there a rim out there with a good bead to prevent this. Here is a picture.
Forums : Tires & Wheels : Problem with tire/wheel (132 Views)
August 1, 2004http://www.patchrubber.com/tire_repair/16118.html
August 1, 2004Either that or spray on glue in the bead area,or screw them in ..
August 1, 2004They don't loose air. Just slip on the rims causing unbalance. I'm going to check with the wheel companies to see if they have any answers on Monday. Anyone out the ever experienced this situation.
August 1, 2004what are you useing the rig for rock climbing or what